Guide to End of Lease Carpet Cleaning

Guide to End of Lease Carpet Cleaning


Carpet cleaning is one of the most strenuous chores that you can decide to do. However, you need not worry because of the many cleaning firms that offer specific carpet cleaning services that you can hire for the job. Cleaning carpets may be strenuous, but it is one of the best ways to maintain your home's general beauty and complement the décor you choose.

At the end of every lease, house agents or property owners expect tenants to leave the house Justas they found it. This is something that is usually included in the lease agreement before signing. This brings up the question, what is an end-of-lease cleaning?

An end-of-lease cleaning s a cleaning exercise that involves scraping and scrubbing the entire house thoroughly to get it ready for the next tenant. Some of the key areas that need a lot of cleaning include bathrooms and toilets, kitchen counters and floors, and flooring. Different properties install different flooring, with some owners opting for carpets to cover the entire floor.


This article is focused on some of the steps you can take to clean your carpet at the end of your lease. Keep in mind most property owners or agents may need to check the entire house's cleanliness level before releasing your lease bond. For the best results, most agents prefer you use the steam cleaning method for your carpet.

Here is a quick guide that can help you get the job done.

Guide to Carpet Steam Cleaning

Steam cleaning is a method that uses steam to clean either rugs or carpets. In this process, water is heated up to a given degree, and the vapor produced is applied under very high pressure onto the carpet or rug. The steam cleaning machine has some degree of resemblance to a vacuum cleaner. This machine introduces a mixture of water vapor and cleaning solutions into the carpet's fabric to loosen the dirt lodged deep inside the fabric and dissolved stains for a refreshing, odorless, and clean look.


Remove all the items on the floor

This is the very first thing you need to do before beginning the cleaning exercise. Remove everything, including furniture, appliances, and toys scattered around the house. Steam cleaning machines involve a lot of moving around, and you need as much movement space as possible to move around to clean the carpet effectively.

Dust all the surfaces

You need to vacuum clean the entire house to get rid of all the loose dirt, crumbs, and dust particles. It is also wise to dust any other surface that dust may have settled on. This helps to eliminate the chance of dust particles settling on the carpet immediately after cleaning. Remember to clean out the wall edges and crevices—to dust and vacuuming help prevent clogging inside the steam cleaning machine.

Treat stains

Use a treatment solution to get those stains that are stuck on your carpet before you begin cleaning. Blot a piece of cloth with the solution and soak the stained area till the stains dissolve.’

Fill the water tanks

Fill the tanks with water for steaming them reattach the tank to the machine. Some manufacturers fix a detergent compartment to the steam machine where you can add the cleaning solutions. However, if your machine does not have this option, you can add the water tank solution.

To avoid any damage to the machine, it is wise to check on the user guideline on what you can add inside the water tank. After this, give the machine enough time to heat the water to evaporation before you can start cleaning.

Start the cleaning process

When cleaning, you need to start with the farthest corner of the room, working your way to the door. This helps to prevent stepping on sections you have cleaned. You need to move slowly to allow your machine to work properly. Remember to overlap each section when cleaning to make sure you get the entire floor covered.

Dry your carpet

When you are done, you need to dry your carpet to expel the moisture trapped within the fabric. You can either let it dry naturally for 4 to 12 hours, or you can speed up the process using a dehumidifier.

If you are not sure about your cleaning techniques, you could as well hire the services of a professional crew to get all that stain and dirt off our carpet in preparation to terminate your lease agreement. Leave the house better than you found it if possible.