Installing an electric hot water system can be a daunting task, but with proper planning and execution, it can be done efficiently and safely. Whether you're replacing an old hot water system or installing a new one, proper installation is crucial to ensure that it operates efficiently and lasts for a long time. In this blog, we will discuss the steps involved in
Aquamax hot water system installation.
Before installing the electric hot water system, it's important to prepare the area where it will be installed. Turn off the circuit breaker and water supply to the old one. Drain the water from the old system and remove it from the area. Make sure to remove the temperature and pressure relief valve from the old system and cap off the pipes to prevent water leaking.
Install shutoff valves on the hot and cold water supply lines where they enter the house. This will allow you to turn off the water on it if necessary without affecting the rest of the house.
Using an appliance dolly, move the new electric hot water heater into place. Connect the cold water inlet to the shutoff valve using copper and a tubing cutter. Wrap Teflon tape around the threads of the hot water outlet and connect it to the hot water supply line using pipe wrenches.
- Install the heating element
Install the heating element into it, making sure to follow the manufacturer's instructions. Connect the electric wire to the heating element and the circuit breaker. Turn the circuit breaker back on and test the hot water heater to ensure it's heating correctly.
Turn on the water supply to the hot water system and check for leaks at the connections. If you notice any leaks, turn off the water supply and tighten the connections.
Turn on a hot water faucet in the house to allow the hot water to flow through the system. Wait a few minutes for the hot water system to heat up and check the temperature of the water coming out of the faucet. Adjust the temperature on it if necessary to achieve the desired temperature.
Make sure to follow any code requirements in your area when installing an electric hot water heater. This may include installing a pressure relief valve, securing it to the wall, and using the appropriate wiring and electrical connections.
Proper installation of an electric hot water system is essential to ensure that it operates efficiently and lasts for a long time. Additionally, it's important to hire professionals. They can give you instructions on
how Aquamax electric water heaters work.
