Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
adrian20
32 Posts
adrian20
32 Posts
Junior Member

Follow
32Posts1LikeMost Active Topics

adrian20

Joined 20 June 2019
Junior Member
3 years3 yearsadrian20adrian20 posted:
Defect advice

Added some more photos to the folder with a level on the skirting boards, also noticed the rear sliding door frame is very badly warped. It out by around 10mm
I've…

3 years3 yearsadrian20adrian20 posted:
Defect advice

Hickinbotham, claim to be the best in SA but wont even help sort issues out.

3 years3 yearsadrian20adrian20 posted:
Defect advice

Thank you very much

3 years3 yearsadrian20adrian20 posted:
Defect advice

Yep :(

3 years3 yearsadrian20adrian20 posted:
Defect advice

Had a quick read of the guide, thanks for that.
I can't find anything regarding the walls on horizontal only vertical, with tiles I'm not sure what it will come under…

3 years3 yearsadrian20adrian20 posted:
Defect advice

Thanks, guys ill take a look,
I've had a building inspector out but seems like they just pick on easy stuff and won't say much regarding my skirting boards.
It all started…

Defect advice
3 years3 yearsadrian20adrian20 posted:
Defect advice

Thanks, guys ill take a look,
I've had a building inspector out but seems like they just pick on easy stuff and won't say much regarding my skirting boards.
It all started…

3 years3 yearsadrian20adrian20 posted:
Defect advice

Hey guys,
I had handed over for my new house around 9 months ago now, been living it in for around 6 months.
We had issues during a whole build I wish…

4 years4 yearsadrian20adrian20 posted:
hybrid floors sound hollow/slappy

Hey,
Has anyone had issues with there hybrid floors sounding hollow/slappy?
We had them installed just over one week ago, Titan XXL boards, and all over the house there are boards that…

4 years4 yearsadrian20adrian20 posted:
Skirtings/walls not straight

Just put a level on the wall and you'll be able to tell if it's wall or floors

4 years4 yearsadrian20adrian20 posted:
Skirtings/walls not straight

Thanks guys.
What would the correct way be to fix this?
Up high on the wall around 1.5m its fine, as I get lower with a level that when it kicks out.
Is…

4 years4 yearsadrian20adrian20 posted:
Skirtings/walls not straight

Thanks I'll give it a chance.
Do you know what causes it?

4 years4 yearsadrian20adrian20 posted:
Skirtings/walls not straight

Hey guys..
I have a few external walls in my house that the ends kick out.
it's only on the edges as well the skirting just kicks out and just above…

4 years4 yearsadrian20adrian20 posted:
concrete slab level tolerance

Wow here in SA it's no more than 10mm over 2m
My whole slab is bumpy and there's packers under the frame everywhere.

4 years4 yearsadrian20adrian20 posted:
Slab issues

Hey guys
Currently typing this from my phone so I can't go into heaps of details.
My slab right now looks terrible, it's covered in cracks and at night with light…

4 years4 yearsadrian20adrian20 posted:
Shale grey or windspray

i hope you are right! some online i see look very light green/bluish.. the others are dark.. its driving me crazy

4 years4 yearsadrian20adrian20 posted:
Shale grey or windspray

thanks!
hope mine looks good.. I really wanted shale grey roller door with basalt roof. but I gave in and let my partner choose the windpsray roller door. im worried its…

4 years4 yearsadrian20adrian20 posted:
Essastone bench top

Hi.
Just woundering if anyone has photos of essastone zinc or nickel.
We are copying this display home for kitcken

The bench top is basalt but we want to go for stone.…

Essastone bench top
4 years4 yearsadrian20adrian20 posted:
Shale grey or windspray

Hi thanks
It's hard to tell but the windspray has a little blue to it doesn't it?

4 years4 yearsadrian20adrian20 posted:
Shale grey or windspray

Hi guys bit of a thread bump
I'm still undecided
We went basalt roof and gutters
With licorice brick
Ultra gloss silver window frames
I haven't see any houses in real life…

4 years4 yearsadrian20adrian20 posted:
Walk in Pantry shelf hights

Thanks, 500 high seems like you'd have lots of wasted space, but i guess it really depends what you put on the shelfs.

4 years4 yearsadrian20adrian20 posted:
Walk in Pantry shelf hights

thanks, guys!
Todays the day i need to lock it in.. so I'm going crazy trying to work it out
is 500 above floor good or should i go higher?
I was even…

4 years4 yearsadrian20adrian20 posted:
Walk in Pantry shelf hights

Hi guys,
My build has a walk in pantry with a size of 3m long by 1.1m wide
Standard shelves are 300 deep with 4
hights are
500mm
900mm
1300mm
1700mm
so first one is 500 above…

4 years4 yearsadrian20adrian20 posted:
Shale grey or windspray

Anyone got basalt roof/wind spray..
trying to get an idea of what they look like together

4 years4 yearsadrian20adrian20 posted:
Shale grey or windspray

Anyone here gone shale grey or windspray for there roller door? And have some photos?
I've picked basalt for my roof and windspray for the roller door and facia which im…

4 years4 yearsadrian20adrian20 posted:
Worth bumping out kitcken when upgrading to 900mm appliances

Bump
What about 150mm
Making meals 3100 (3400 with breakfast bar)
Any advice

5 years5 yearsadrian20adrian20 posted:
Worth bumping out kitcken when upgrading to 900mm appliances

When upgrading stove, oven and rangehood 600mm to 900mm.
Is it a good idea to bump the kitchen out too? To make up for lost cupboard space and bench space?
My meals…

Worth bumping out kitcken when upgrading to 900mm appliances
5 years5 yearsadrian20adrian20 posted:
Electrical upgrades

Whats 3 Phase power? is this more for bigger homes?
Id imagine to install power points after hand over would cost more than $55?
The led downlights at $140 EA is a…

5 years5 yearsadrian20adrian20 posted:
Electrical upgrades

Hi guys.
I'm in the early stages of a build with statesman homes, yet to do selections so unsure of what price they charge for upgrades yet and don't think ill…

5 years5 yearsadrian20adrian20 posted:
Built in robes

Hi guys thanks for the replys
Just an update I asked the builder about how it works with them doing the built ins
This is the response I got
'We add a…

Most Active Topics

Defect advice
15 Posts
More
Joined homeone
20 June 2019

Australia's largest home building and renovation
community with over 1.8 million posts

Home
Pros
Forum
Start a new topic
About
Advertise
Contact Homeone
Articles
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024