Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
airwolf
49 Posts
airwolf
49 Posts
Junior Member

Follow
49Posts44LikesMost Active Topics

airwolf

Joined 17 November 2011
Junior Member
Followers
3 months3 monthsairwolfairwolf posted:
Thomas Archer Bayside Build

Site supervisor shouldn't be against with that and any builder who is building right should not be worried of that as well.
End of the day it's your money and…

7 months7 monthsairwolfairwolf posted:
Hydronic Heating Panels & Boilers

if this is not too late, Bosh boilers and burgman panels are high quality products. I am using the same brands for my new house (installation of hydronic is yet…

10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

alexandrachel , sifntdaz
- Hydronic can definetely run on electric heat pump ( talk to DPP…

  ⋅  1
10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

alexandrachel : I guess the Que control is less expensive than Neo . Que zone sensors / controls are battery powered and are…

  ⋅  1
10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

Thanks or the insight :) . I see the point now. I sort of guesses it would be a bit of a work specially with the…

10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

interesting..I think it could be due to the quote is from a direct installer. if you add to the builders margin etc it would then bump up to approx 50K…

10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

Cool. Roughly how much was your cost ? And how many kw ? Do you know the rough cost for a 20kw system ?
I got this number from an…

10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

have to check with them. Last time I checked there was one customer who got a system. ( not a lot of ppl do this due to the price tag…

  ⋅  1
10 months10 monthsairwolfairwolf posted:
Thomas Archer Hive 45 - Boroondara [2021]

Hi annakoh, while you are still looking for options, check for AirSmart small duct system too. This is far better than current offerings, But the price tag would be around…

  ⋅  1
1 year1 yearairwolfairwolf posted:
Thomas Archer Evoke (Modified) Kingston Build - 2020/2021/20

Above reflects pretty much the same experience We had. Its funny how the 25K site cost is quoted from year 2018 to even now. I saw the construction managers initial…

2 years2 yearsairwolfairwolf posted:
Thomas Archer Hue 42 Bayside Build - 2020/21

This is beautiful :)

2 years2 yearsairwolfairwolf posted:
Who to build with Victoria

It's terrifying to see the list of Alarming builders :shock:. Good call Darbecca !

2 years2 yearsairwolfairwolf posted:
Thomas Archer Bayside Build

The slow speed at the fixing , completion stages is pretty normal with most builders ( both volume and small scale ).
Once the painting is done, the work is done…

  ⋅  1
2 years2 yearsairwolfairwolf posted:
West facing house, what’s the best way to reduce heat.

I agree with this.
I am also in the process of designing our house these days and our block faces west.
What I have discussed with my builder is to use low-e…

2 years2 yearsairwolfairwolf posted:
Heating and Cooling - High efficiency w/ Allergies

Hello Simon,
I am not sure if this is a late reply. Given your requirements, I would think a hydronic radiator panel system would be a good solution if you are…

3 years3 yearsairwolfairwolf posted:
Semore homes

Visited two sites last weekend. one in progress and one moved in. Both of the owners are very happy with the service and end products. Specially with their flexibility to…

  ⋅  1
3 years3 yearsairwolfairwolf posted:
Semore homes

yeah, I went to see a project in progress in bentleigh. Site looked pretty good.
Planning to go through a couple of ongoing and past projects prior to do a…

3 years3 yearsairwolfairwolf posted:
Thomas Archer, GJ Gardner (Inner East)

oh I forgot to mention that there's this new player in the market called Semore homes, I only found about them last week. I am still researching on them. looks…

3 years3 yearsairwolfairwolf posted:
Thomas Archer, GJ Gardner (Inner East)

Hi Wewu,
Some of the costs may be related to your particular block ( due to fall of land, storm water connection, electrical etc) so please keep that in mind when…

  ⋅  1
3 years3 yearsairwolfairwolf posted:
Semore homes

Hi there,
have any one heard about Semore homes. It's a new custom builder in south east melbourne.
I looked into their FB page and the site. looks pretty good.
Any…

3 years3 yearsairwolfairwolf posted:
Thomas Archer, GJ Gardner (Inner East)

Hi guys,
Just thought to write this if it would be helpful for your journey.
I have been through the same exercise during the last 12 - 16 months. Talking to…

10 years10 yearsairwolfairwolf posted:
A couple home theatre questions

Hi Donuts9999,
This is an interesting question. I have been in the same situation few monthds back and was able to gain lot of experience\knowledge regarding designing a HT system and…

10 years10 yearsairwolfairwolf posted:
Speaker Cable - beware Not all are the same :)

Hi Guys,
Just thought to share some recent experience with speaker cables I had which I thought may be useful for those who are keen in setting up a high quality…

10 years10 yearsairwolfairwolf posted:
Flooring for the home theatre room ?

Hello,
I'm thinking of having 'Carpet' for the floor covering in my home theatre room since it can help with acoustical properties of the room.
So when selecting a carpet do I…

10 years10 yearsairwolfairwolf posted:
Home Theatre Projectors Epson or Mitsubishi ?

cinder and Matt , thanks so much for the advices.
I will find a place that has several models on display. Really appreciate your suggestions.
thanks !

10 years10 yearsairwolfairwolf posted:
Home Theatre Projectors Epson or Mitsubishi ?

Hi Guys,
Can any one give me a reasonable idea of whether to go for a Epson ESTW6000 or ESTW9000 projector or Mitsubishi HC7800 projector ?
The price point of the ESTW6000…

10 years10 yearsairwolfairwolf posted:
Help: Drilling the Top plate for pre-wiring

Hi All,
thanks alot for the quick responses.
Paulw11, your idea is quite nice. But I'm afraid my builder will be ok to do this since now I have already signed…

10 years10 yearsairwolfairwolf posted:
Help: Drilling the Top plate for pre-wiring

Hi ,
I need some help with drilling the top plate (where studs are connected at the cieling level) for pre-wiring. I plan to pre-wire my new house which is being…

10 years10 yearsairwolfairwolf posted:
Home Theatre Suggestion!!!!! Help!

Hi hillboy168,
Yeah. I suggest that you go for Paradigm CT-110 system ( 5.1 system with the paradigm cinema subwoofer) . It's a great value for money and very good performer…

10 years10 yearsairwolfairwolf posted:
Home Theatre Suggestion!!!!! Help!

Yeah, i too agree. There are better value for money products in the market than Klipch. Btw how much is your budget for the speakers ?

Most Active Topics

Thomas Archer Bayside Build
383 Posts
More
Joined homeone
17 November 2011

Australia's largest home building and renovation
community with over 1.8 million posts

Home
Pros
Forum
Start a new topic
About
Advertise
Contact Homeone
Articles
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2022

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2022