All done finally, computers are in and the room looks great. Lots of light from the 3x 10W LED downlights and the 20W CFL on the wall.
Just need to…

You're right, fortunately it's only a few mm and the plaster has covered it, should get away with it
If I had the coin I would…

Just an update, it's still a work in progress
Stripped off the old boards, screwed in and countersunk the villaboard, apparently the dust is really nasty…

Cheers guys Sounds like villaboard is the go. I'll have to pull up the colorbond to put some foil insulation in by the…

I removed the remainder of the ceiling last night, here's a photo of the finished product:

What product should I be using on the ceiling?
The ceiling extends from the…

OK here is a quick photo with the panel removed, what material should I replace the panel with? Blueboard, gyprock or a different product? What about the walls…

I'll pull the wood panelling off the bottom over the weekend and take a look/pictures there should be an air gap/beams between the colorbond and…

Hi Arfur,
Thanks for the reply
I think they fixed it to the old roof in a bad way, but the roof has since been replaced, I'll…

Hi all,
I just bought a property and it has a couple of sunrooms, one of which I was hoping to re-purpose as a computer room.
In the past the roof was…