I like both. It should all look better once the round window has the decorative bars installed.

Window has been changed. Round window will have bars added when they start with the second level Linea cladding. Interested to know what people's thoughts are on the two different…

Hi RookieHomeOwner
The number one thing is to be sure you are 100% happy with your design before at the very latest handover to construction (make sure you understand how the…

A little more has been done. Most of the pillars now have their collar bases and the feature round window is now installed... except for they forgot the decorative bars,…

Almost there... looking good!

The plans say it has 3 panes (1 fixed, 2 awning) all of the same size to align with the slider below. It got installed with different sized panes. Not…

We now have some windows and Hebel along with rough in for power, plumbing and AC. We have questioned the upper facade window as it is not exactly as per…

Hey Funkynoodles, have you been able to get some updated photos? Interested in how the build is progressing!

Hi Michelle
Update: I have now applied Vivid White (Semi-Gloss) on some doors and trim, massive improvement, thank you! I'm just not sure if Semi-Gloss will be fine for the handrail…

Thanks Michelle, I suspected that I need to go there or Natural White, much appreciated!

Hi Michelle, I hope you can help?
We recently had our exterior trim painted with Lexicon Half which looks great. There is a door architrave in our garage that is a…

Another day and we now have the lower roof trusses done and gutter/facia. I did consider a number of times placing a gable over the entrance but ended up keeping…

Cannon Hill

Around $580K with a reasonably high level of fitout. Does not include driveway, landscaping, external floor tiling. However I could have easily spent more on fitout.

On goes the roof today!

Going by my research, in Brisbane you would average $1750/sqm for a custom build. With a project builder in Brisbane you are around the $1350/sqm. This is only by my…

It can also depend on the builder in regard to cost feasibility. With my last property (209sqm) the builder had 2400 standard, 2550 for around $5500 and 2700 for around…

Facia and guttering installed on the upper level today!

You would need to read the building agreement to see what was exactly agreed. Just for reference, I had 5 truckloads (65 ton) of clean fill delivered to site before…

100% do it, just make sure you get the windows made that extra 300mm taller as well along with 2400mm high on sliding/bi-fold doors (in lieu of 2100 high). Preferably…

Onwards and upwards! I can now start to see the outline of how the building will look on the site. Happy with the posts/pillars which will eventually be white and…

Framing is underway!

And slab is done!

The slab is finally happening!

Hi Holly, the internal wall colour is Surfmist. Yes, the same colour that looks off white on external surfaces. If you are not convinced, grab a sample pot and see…

I said to Clarendon to pretty much copy the internal colours of that display.

With the internal wall colour we actually went with Surfmist with white skirting/doors/architraves. It looks completely different when used internally. Example in a display home: https://www.clarendon.com.au/uploads/im…

Bricks confuse me which is why I have gone with rendered Hebel and Linea board (and the fact I’m going with Hampton’s facade) 😄. I do know that upgrading to…

Hi lozziloo, we ended up going with monument with sarking in addition to insulation. It was just easier for me to agree 😄

I built my last single storey with 2700mm ceilings and now building a two storey with 2750mm and 2600mm ceilings. On both I got windows 300mm higher and on the…