Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
dom0387
20 Posts
dom0387
20 Posts
Junior Member

Follow
20PostsMost Active Topics

dom0387

Joined 10 May 2021
Junior Member
Following
6 months6 monthsdom0387dom0387 posted:
Building Ridge RL and Max Height of Building over 8.5m!!

We've lowered the roof pitch from approx. 22.5 degrees or so down to 22.0 degrees (bringing the Ridge RL down by 60mm) and overall height of building is now 8.48m…

6 months6 monthsdom0387dom0387 posted:
Building Ridge RL and Max Height of Building over 8.5m!!

All good mate,
Yeah we had many problems with the plans unfortunately that needed correcting, measurements, joists, materials, timber trusses, setbacks, missing tables and compliance notes, etc etc
These were errors on…

6 months6 monthsdom0387dom0387 posted:
Building Ridge RL and Max Height of Building over 8.5m!!

Any ideas how to calculate RL height and adjust it

6 months6 monthsdom0387dom0387 posted:
Building Ridge RL and Max Height of Building over 8.5m!!

Hi Simeon,
Hope your well =)
Apologies not sure what happened the host must have deleted it, I have re-uploaded it to a new host now (page 4 shows the elevation with…

6 months6 monthsdom0387dom0387 posted:
Building Ridge RL and Max Height of Building over 8.5m!!

Hi Guys,
I need some urgent help with my architectural plans, see plans uploaded here (page 4 shows Ridge RL) https://easyupload.io/pzb24r
My certifier (CDC) has advised our maximum…

dom0387 followed:
7 months7 months
7 months7 monthsdom0387dom0387 posted:
Custom Build Floor Plans - Please Review!

Thank you so much, I am loving some of the changes you have made!
I think you have done a much better job than the “architect” I have paid so much…

  ⋅  2
7 months7 monthsdom0387dom0387 posted:
Low E glass - are you using it, pros and cons

Its also only 2-3mm thick, some provide thicker up to 5-6mm but cost almost as much as solid timber prices.

7 months7 monthsdom0387dom0387 posted:
Low E glass - are you using it, pros and cons

Technicaly you can, but you lose the finish and lacquer/oil and UV coatings, and texturing.
I cannot see any situation where its feasible to sand engineered timber down.
Engineered timber as you…

7 months7 monthsdom0387dom0387 posted:
Low E glass - are you using it, pros and cons

Cannot resand engineered timber, no matter what your read or sales people tell you its marketing bs. There is no such thing as resanding engineered timber.

7 months7 monthsdom0387dom0387 posted:
Low E glass - are you using it, pros and cons

My whole house has a parrap about 1.5 metres then the roof on second floor has small eves.
My main concern is the larg windows at my groundfloor facing the alfresco…

7 months7 monthsdom0387dom0387 posted:
Custom Build Floor Plans - Please Review!

I have uploaded the PDF file (with dimensions) of the plans here where you can download it - https://ufile.io/fptjbovn
Thank you @oklouisde for your reply - I…

7 months7 monthsdom0387dom0387 posted:
Low E glass - are you using it, pros and cons

Dear ECOECO,
Can you please help advise me what the average cost would be to make all my windows (single glaze standard) the low-e glaze?
The main purpose I want low-e is…

7 months7 monthsdom0387dom0387 posted:
Charleston Homes - anyone worked with them?

Hi All,
I noticed you mentioned 30% builders margin, this seems very high, but given its a volume builder and Charleston are notorious for being overly expensive this I can see…

7 months7 monthsdom0387dom0387 posted:
Custom Build Floor Plans - Please Review!

Hi All,
Can I please get some feedback, especially anyone who is a builder/designer/architect to provide some constructive feedback about our plans and what you think about them and would potentially…

1 year1 yeardom0387dom0387 posted:
How much to build this French Modern home?

Thank you Simeon,
I have a meeting upcoming with my Architect and will ask this question, much appreciated!

1 year1 yeardom0387dom0387 posted:
How much to build this French Modern home?

After receiving revised house plans the total square metres noted in my currently uploaded plans was way off.... by 39m2!
Current plans shows ground + 1st floor total area excluding outdoors…

1 year1 yeardom0387dom0387 posted:
How much to build this French Modern home?

Is that including the Optional Extras?

1 year1 yeardom0387dom0387 posted:
How much to build this French Modern home?

Thanks for the feedback, appreciate the ballpark.
Question, how did you base this price on just for my better understand.
This will help me understand where the money is going so I…

1 year1 yeardom0387dom0387 posted:
How much to build this French Modern home?

Location is Sydney

1 year1 yeardom0387dom0387 posted:
How much to build this French Modern home?

Can anyone here who has knowledge/experience in the building industry tell me roughly how much I am looking to build the following Modern French Provincial home?
Keep in mind this is…

Joined homeone
10 May 2021

Australia's largest home building and renovation
community with over 1.8 million posts

Home
Pros
Forum
Start a new topic
About
Advertise
Contact Homeone
Articles
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2022

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2022