I will be using this for component video and some audio.
I have plenty of this RG59 its a good flexible type that I had on a long run once.
I want…

Im wanting to buy some Tributaries crimp on connectors.
I have metres of there R59 coax to cut to required lengths.
Im wanting the CONC-MINI RS
http://www.tributariescable.com/product ... ectors.cfm
Any…

I noticed ants and a lot of bugs hanging around my garden untill i started using powerfeed (fish based) it seemed to clear them all up apparantly they dont like…

what way do you want the led to work? what wires have you got there now? Behind the switch.

You dont sound like a qualified electrican, even then its very easy.

Are you wanting to build right on the boundary? im about to get into the situation myself going to see the local council soon, Ive heard that if you build…

Concrete is the only way to guarantee it wont move or have weeds grow up from under it. Speaking from past experiences.

I tried to upload a pictures but they wont show up, sorry.

I have a couple of photos but dont know how to post them on here.
I dyna bolted some 45x90mm treated pine to the concrete 450mm apart then screwed the decking…

What do you want to know exactly? I done it and was quite easy

Clipsal and HPM are he only brands worth using. Good build quality and easy to work with. RRP is around $17. But sparky's will be buying them for around $8…

Do it yourself its easy

When i done my house i just drilled holes in the noggins and top plate, no conduit. In the future i only have to cut hole in plaster and drop…

How have you found the light output compared to the 50W halogen?

Im a sparky and if it was my house how i would do it is, Have a switch mounted on the splash back same as you have for youre light…

Yes you should receive that at handover along with the plumbers and also termite protection certificates

Theres is 100's of different types wattages globes etc. But in youre case you will need to go to a bigger fitting.

I have 40X30 laid horizontally. White with white grout.

I think PD use A&L & Dowell, neither of which do a sliding double glazed window. The sliding window is the cheapest of window designs and really doesn't suit…

You can also ge Colorbond over a stainless steel base instead of zincalume if you can afford it.

It would be very expensive to have them moved now. For the last 20 years 9 out of 10 houses have had them outside in the meter box.

I would hate to be the electrician on this job, Plasterer did not make one hole for the wiring in any of these photos.

2340 doors are a must with 2700 ceilings in my opinion. I would also want higher windows as well because with the 2340 doors you also should sit youre windows…

If you go any higher than the 2550mm ceiling height you should go with the 2340mm doors (and robes) or it doesnt look right and also add another 300mm to…

All i can tell you is M is a good one to have (medium reactive). No major works required for a slab. Also i think H is another good one…

If you dont like the look, HPM make the heat lamp fittings in a recessed type (like a big downlight). Combine them with down lights for general lighting will look…

In Victoria not all areas have 3 phase in every pit. The street beside you might, the pit across the road might but you might not. Best bet get a…

Yeah i meant with gyprock, didnt realise it went straight over frames. Thanks

What do they use to batten the walls these days for plaster? Steel or timber?

Which direction is the prevailing edge facing? ie east, south etc