Thanks, no leaking to speak of as I felt the base crack when I stepped in before the water ran, and haven’t used the shower since.
Speaking to someone today who…

Hi everyone.
After some advice on repairing a cracked shower base (see attached).
We'll be renovating the bathroom at some point so just after something that will work for us over…

Hi everyone.
This is actually a kitchen tap but this seemed like the best place to ask.
I have a dripping single lever mixer tap, so thought I would change the…

Also looks as though people have quite a few other names for it when it snaps due to the rings being corroded on!
Do you know whether the rings are designed…

Bit of online digging, looks like these are called "anti-vandal rings" and the tool aradelt was referring to is an "anti-vandal tap head spanner"!
https://diy.stackexchange.com/questions ... n-tap-head
Interesting…

Yep, right you are everyone. Another photography attempt, this time with 2 phones...one for light one for camera, shows the slot/hole directly under the handle as aradelt pointed out in…

Thanks and perfectly understandble, I know what the thing looks like and still have trouble making head or tail of that picture!
If I can get a bit more clarity I…

Ah ok thanks I see what you mean now.
But no I don't think there is anything like the circular nut there, that little notch in the photo appears to…

Thanks aradelt.
After much faffing about the best shot I could get is the one here and is still not great.
But I think I can see what you are…

Hi everyone.
Can anyone tell me how I would go about changing washers on the taps shown ? There is no obvious way to remove the handle for access.
If I feel…