Double Strength Hog Bristle or Self-Destruct Gloss???
Hi,
Iām going out of my mind trying to find out the colour of my doors and trims.
Does anyone have a photo of 1.5 or 2 x Hog Bristle Gloss or…
Ask a lighting design engineer - general Q&A
What a fantastic thread!
What are your thoughts on the following lights for 2.7 metres ceilings?
https://www.lightingillusions.com.au/sh ... c-ww-21994
My plan was to re use the existing downright holes…
How to know if Garage Sectional Door is level?
Thanks for replying so quickly! I though that the top bar would have to be stable as it drags the door all the way up.
Is there a way that I…
Garage Door Ceiling not Level! Help!
Help! I was on top of my flat garage roof going up to the second level when my ladder fell.
Thankfully, I landed on the roof and my ladder fell down…
How to know if Garage Sectional Door is level?
I'm wondering if anyone can give me any tips on how to understand if my garage sectional door unit is level.
It has the motor mounted to the ceiling, which follows…
Bench Top Heights and appliances
Maybe you have to add a spacer in from the floor to the bottom of the appliance so it raises it slightly, and then hide it behind the trim
{Dawn} SE Melb Build - Done and dusted!
It's looks like a fantastic build!!
How does the smirfist windows look against the white on white walls?
Is Hog Bristle a modern or contemporary colour?
Is there a colour you think would work well with Classic Cream windows?
I think the house is painted in some Hog Bristle full variation but I can't tell for…
Is Hog Bristle a modern or contemporary colour?
Is there a colour you think would work well with Classic Cream windows?
I think the house is painted in some Hog Bristle full variation but I can't tell for…
Is Hog Bristle a modern or contemporary colour?
I'm having a hard time choosing colours, and wanted to ask whether Hog Bristle would suit a modern house, or is it more for contemporary houses?
I like the colour but…
Turf Installer the Fu Manchu Way?
Hi,
Are there any installers who might be able to install Turf the Fu Manchu way (as indicated in the above post) in the Eastern Suburbs of Melbourne?
What do you think…
Raising Paver Level with sand?
Thanks for the info Beetaloo. I don't believe I have any active dampcourse, so my plan before raising the level would be to dig up the soil next to the…
Raising Paver Level with sand?
Hi,
I was wanting to replace my entire paved area, with a decking, and after asking my council for permits, they said that it would be estimated at over $2,500 -…
Surface Water Drainage/Mould Inside Brickwork Subfloor HELP!
My apologies for not getting back to you sooner, as I hadn't received any emails saying that someone had replied to my post. All fixed now!!!
Thanks again for the great…
Surface Water Drainage/Mould Inside Brickwork Subfloor HELP!
Thanks for your advice.
If you had to excavate, then how far would I need to excavate away from the brick wall? Would you dig right down to the top of…
Surface Water Drainage/Mould Inside Brickwork Subfloor HELP!
Ahh, I thought that I would stop the dampness with the water proofing, and ease the water away with the French Drain, hopefully channelling the water along the footer to…
Surface Water Drainage/Mould Inside Brickwork Subfloor HELP!
Hi,
Firstly, this is a fantastic set of forums, which will keep me occupied for a very long time!
Now to my painful problem.
I had a building…
Plaster Joins Visible & Handover
Thanks again for your insight, and excellent advice.
How would I convey that message to the builder - as I don't work in a trade related field?
Plaster Joins Visible & Handover
Thanks for the quick reply (as this is quite distressing to me), and expertise.
What if I can feel a very slight bump/rise where each plaster join is see-able?
Do I have…
Plaster Joins Visible & Handover
Hi,
Happy New Year to all!!
These forums are fantastic for understanding a lot of the building terminology that keeps me up at night.
We are nearing the handover phase with our dual…