Wow can't believe how long its taken the compo should be set at 1000 a week house should only take 5 months maximum to construct and even that is too…

Yes that is one way that the matrix can be finished off as it becomes an explanation joint between the masonry and the cladding and as long as the flashings…

They should use fibro sheeting over the top of the yellow tounge flooring

Between 300 to 350 per m2 for a deck is an average price

Yes you can use timber to line th eaves and use it as cladding Australian hardwood can be used inside or outside

How is the ply ment to stick to the concrete then? ^^^

If your laying solid Australian hardwoods not floating floor on a slab you need to get some 9mm ply at least with some concrete nails thay have washers on them…

Its still green at 6pm water may have prevented it from cracking concrete heats up as a chemical reaction when it sets

If it was that hot when pouring one would have thought he would have hosed down the concrete to slow the curing down so it didn't crack

Don't paint the jarrah frames they can become a feature with a white door the will still look fantastic if you re coat them in a natural stain

There is nothing wrong with eaves linings getting wet

Gvb frame inspection usually happens after roof and brickwork is up