Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
jsmi
179 Posts
Bronze Member

Follow
179Posts10LikesMost Active Topics

jsmi

Joined 15 June 2015
Bronze Member
1 month1 monthjsmijsmi posted:
Custom Design floor plan thread post them here!!

Hi everyone
I know this isn't full plan but the contributors to this thread are very knowledgable and have great ideas so posting here, thanks for understanding!
We are at planning/design stages…

2 months2 monthsjsmijsmi posted:
My KDR Metricon Hampshire - Liberty - 45 Melb

I think in a few months you will not be worried about the tiles at all. If this is one of the bad things that go wrong, then you're doing…

2 months2 monthsjsmijsmi posted:
Metricon Henderson 42

Sorry for another question M&T! Your house is looking magazine-worthy. Well done!! No wonder you are loving it.
I love the look of the pool surround tiling and am thinking…

4 months4 monthsjsmijsmi posted:
Horizon Homes

I just stumbled across that 60sq roselea thread - user is cyoung2203

4 months4 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

Did you make pre-build provisions & electrical conduits for low-lying, upwards shining lights in your garden, to highlight the house? Or can you just do it post build?

4 months4 monthsjsmijsmi posted:
My KDR Metricon Hampshire - Liberty - 45 Melb

Hey Renman, great pics. Can you please tell me the full width of your ensuite double basin vanity, and also the bathroom single basin? Cheers!

4 months4 monthsjsmijsmi posted:
Horizon Homes

Jacks I just sent you a PM but not showing in my sent items, can you let me know if it went through?

4 months4 monthsjsmijsmi posted:
My Metricon Bordeaux 56 build

Vuster. Apologies if you've already mentioned it, what are you going to do with the fresh back fence, paint it, stain it, leave it, vertical garden...?
The front will look…

5 months5 monthsjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

Jacks, I will PM you to save hijacking 3Ts thread.

6 months6 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

Orph with that fancy deck you have, you should look into getting some Schaeffers deck sealant. It's a quality product. Check out the ad on YouTube 🤣

  ⋅  1
6 months6 monthsjsmijsmi posted:
Island bench location

Could you put in a nice double cavity slider at end of hallway/the entrance to the open plan area that would give you the flexibility to block it off when…

  ⋅  1
7 months7 monthsjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

Hi jacks
We are moving slowly with Horizon (nothing to do with them, delays are all ours) and are still talking design & costs. I hope in the next few weeks…

7 months7 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

Hey Mona, what are the dimensions of your garage? And is the issue the narrow width (doors opening) or length? I drive past so many houses with 'double' garages holding…

7 months7 monthsjsmijsmi posted:
Metricon Henderson 42

Do you mind me asking, what brand fridge and how hefty was the price tag?! Is it something that can be done with any fridge or only certain brands/models?

7 months7 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

I saw one of those through the window at Reece bathrooms....

  ⋅  1
8 months8 monthsjsmijsmi posted:
HELP! Triple or six stacker sliding door in dining room?

Are all the cassette type ones flimsy, or is it a case of you get what you pay for? Some of them are quite expensive (eg centor).

8 months8 monthsjsmijsmi posted:
Metricon Henderson 42

I am pretty sure the reason it is "intentional" is because if you took the split out then you want the top and bottom thickness to match the cupboards either…

9 months9 monthsjsmijsmi posted:
Difference between freestanding 90cm oven and built in 90cm

CEK, I have read about people putting (squeezing) a strip of silicone down the small gap between benchtop and freestanding oven. Although I haven't seen it first hand.
Have you…

10 months10 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

Surfmist primer?

  ⋅  1
10 months10 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

Haha I thought it was matched to the garage door already! Must have just been the render. I would go with the surf mist - so many houses these days…

  ⋅  2
10 months10 monthsjsmijsmi posted:
Dream Metricon Glendale 38 (Sydney)!

Orph, the garage door goes really nicely with the gutter and rendered column/pillar - and contrasts perfectly with the bricks. I think you have made good colour choices.

  ⋅  1
11 months11 monthsjsmijsmi posted:
Let's talk about front door hardware

https://encrypted-tbn1.gstatic.com/imag ... HfvBWu1swM
How about one of these? Best of both worlds

11 months11 monthsjsmijsmi posted:
Our OB ..Sydney

Hey gandn, how's everything in your amazing home? Haven't heard from you in ages!! Assume landscaping must be finished now. Interested to hear how your house has managed with the…

1 year1 yearjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

Haha all good. Thanks

1 year1 yearjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

B4M3T, are you getting my PMs? I tried to send you one again today but Tapatalk giving me error messages....

1 year1 yearjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

PS I am looking at the LG 906L fridge as I just know they're never ever big enough!!!

1 year1 yearjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

Hey B4M3T, happy new year! Not started building yet although we've got a first draft of the plans but still working through it to make some changes. Mostly it's ok…

1 year1 yearjsmijsmi posted:
Custom home design Sydney - narrow block: WE ARE IN!

How much capacity in the Samsung fridge? Relatives have a F&P and it always seems cramped. Think it's about 600L overall but don't know what the split is....
Your house looks…

1 year1 yearjsmijsmi posted:
My Metricon Bordeaux 56 build

Vuster, what roof tiles are those? Love the flat profile & slate look. House is looking amazing. You must be giving the trades some good lunches to be getting that…

1 year1 yearjsmijsmi posted:
Custom Home Builders in Sydney – Has anyone used one?

Buildcraft are nearing completion on a house in Strathfield, Ada avenue. Apart from it looking quite nice, I can't help with any more than that sorry.

Most Active Topics

More
Joined homeone
15 June 2015

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on TwitterFollow homeone on Google+
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2018