Home
Pros
Forum
  • About
  • Register
  • Contact
InboxSent
MembersPros
WatchingStarredHistory
melbbuild
63 Posts
melbbuild
63 Posts
Loyal Member

Follow
63PostsMost Active Topics

melbbuild

Joined 12 July 2012
Loyal Member
10 years10 yearsmelbbuildmelbbuild posted:
Built in BBQ in alfresco

Hi guys, is anybody having a built in BBQ in their alfresco area, because I am planning to do one, however what I am so confused is that I read…

10 years10 yearsmelbbuildmelbbuild posted:
Built-in BBQ & outdoor room

Hi guys, I read on beaf eater's website that Minimum Clearance to Combustible Materials is 450mm.
I am confused because I see a lot of people have their built in BBQ…

10 years10 yearsmelbbuildmelbbuild posted:
Anyone using Lambs Tongue Architrave & Skirting?

Hi guys, just wondering if anyone is using Hume Door's "Lambs Tongue" Architrave and Skirting
I am considering between Lambs Tongue and Single Bevel.
I am having 2.7m ceiling and having the…

11 years11 yearsmelbbuildmelbbuild posted:
Please show me your bi-fold and retratable screen

Hi guys, I got my windows and bi-folds delivered today however I think they are made wrong.
I am planning to get S1e centor retractable screen which will be fixed in…

11 years11 yearsmelbbuildmelbbuild posted:
shampoo niche, what to put for backing support

Hi Robbie, thanks for your reply.
I think I understand what you are trying to say. So basically I just cut the villaboard (which is cement sheet), slightly larger than the…

11 years11 yearsmelbbuildmelbbuild posted:
shampoo niche, what to put for backing support

Hi Stewie, thanks for your reply.
Actually I am still in the framing stage, so the cladding is not done. Which means I can still nail a piece of ply bracing…

11 years11 yearsmelbbuildmelbbuild posted:
shampoo niche, what to put for backing support

bump, anyone please help!

11 years11 yearsmelbbuildmelbbuild posted:
shampoo niche, what to put for backing support

Hi guys, I am having a shampoo niche upstairs, it will be on the external wall. the outside cladding is 100mm foam with render.
so I am wondering what should…

11 years11 yearsmelbbuildmelbbuild posted:
Backing support for shampoo niche

Hi guys, I am having a shampoo niche upstairs, it will be on the external wall. the outside cladding is 100mm foam with render.
so I am wondering what should…

11 years11 yearsmelbbuildmelbbuild posted:
window height and internal door height. what is best

Hi, thanks for replying.
I do not understand why there is no brickwork above windows of 2400 high? the height is 2700mm. isn't there another 300mm for brickwork?

11 years11 yearsmelbbuildmelbbuild posted:
window height and internal door height. what is best

Thanks for that. is your internal door 2340 high?

11 years11 yearsmelbbuildmelbbuild posted:
how high to set windows/doors

Hi guys, I am building double storey house.
my ceiling height is 2700 for both floors
my front entrance door and front garage door is 2400 in height, also my bi-folding door…

11 years11 yearsmelbbuildmelbbuild posted:
window height and internal door height. what is best

Hi guys, I am building double storey house.
my ceiling height is 2700 for both floors
my front entrance door and front garage door is 2400 in height, also my bi-folding door…

11 years11 yearsmelbbuildmelbbuild posted:
dishwasher height problem!!!

hi guys, I am having a 60mm stone benchtop on my island bench, and will be putting dishwasher under it. given that the bench height is 900mm, and my stone…

11 years11 yearsmelbbuildmelbbuild posted:
Linear Channel Grates , what is the depth?

I actually met one of the channel grate manufacturer in melbourne home show over the weekend,
they have told me that the channel grate outlet is 50mm in diametre, and I…

11 years11 yearsmelbbuildmelbbuild posted:
Linear Channel Grates , what is the depth?

Hi again, i just found out from the manufacture not to worry about the depth of that pipe outlet because they are only 50mm in diametre, which is smaller than…

11 years11 yearsmelbbuildmelbbuild posted:
Linear Channel Grates , what is the depth?

Hi everyone, just concerned by the drop in level for shower area during concrete pour
this picture is my bathroom downstairs which will be on concrete slabs. i have marked the…

11 years11 yearsmelbbuildmelbbuild posted:
Laundry and Garage back door, timber frame or aluminium?

Hi guys, just wanted to get some ideas, should I put the standard timber door frame for laundry and garage back door? or should I put aluminum door frames? is…

11 years11 yearsmelbbuildmelbbuild posted:
Laundry and Garage back door, timber frame or aluminium?

Hi guys, just wanted to get some ideas, should I put the standard timber door frame for laundry and garage back door? or should I put aluminum door frames? is…

11 years11 yearsmelbbuildmelbbuild posted:
How much do brick layer charge?

Hi guys, I'm owner building in melbourne south east, monash council area
I've recently obtained a quote from a brick layer
it's $1.20 per brick for ground floor and $1.40 for top…

11 years11 yearsmelbbuildmelbbuild posted:
Drop in level for bathroom & laundry for floor waste?

Hi guys, I just wanted to ask a question. We will be shower 1 floor waste in our laundry and 2 floor waste in our bathroom (1 in shower and…

11 years11 yearsmelbbuildmelbbuild posted:
Entrance door frames

I am aware that both window company and door company provides door frames.
Which one should we choose?
I think window company's door frame tends to match with your window frames so…

11 years11 yearsmelbbuildmelbbuild posted:
Please recommend me a good concretor for slabs in Melbourne

Hi everyone, can someone please recommend me a good concretor for doing slabs in Melbourne
thanks

11 years11 yearsmelbbuildmelbbuild posted:
Building Site Signage

I scrolled down and clicked on the image under Series 4 - Mandatory Safety Signs Collection , it is charging me $29.95?

11 years11 yearsmelbbuildmelbbuild posted:
Building Site Signage

Hi guys, I just read online that "The Building Regulations 2006 require the person in charge of the building work to display a site sign on all building sites.”
I wanted…

11 years11 yearsmelbbuildmelbbuild posted:
Regarding owner builder insurance

Hi guys, I am about to owner build my house. demolition is finished. i am now about to buy insurance.
I am aware that there a 3 main ones being 1.…

11 years11 yearsmelbbuildmelbbuild posted:
Owner builder courses in Vic

OP, have you thought about holmesglen owner builder course? its only two days over the weekend
http://www.holmesglen.edu.au/programs/s ... er_builder
I haven't tried, but would love you hear from…

11 years11 yearsmelbbuildmelbbuild posted:
Melbourne owner builder concern - two townhouse OB??

Hi Ell, thanks for your reply
I actually submitted the two applications forms in today by mail but I left the "unit number" box blank under Property Details.
I also enclosed a…

11 years11 yearsmelbbuildmelbbuild posted:
Melbourne owner builder concern - two townhouse OB??

what if in the end, when construction is completed and subdivided, the street number turn out differently? will they force me to demolish the newly built home? because i got…

Most Active Topics

More
Joined homeone
12 July 2012

Australia's largest home building and renovation
community with over 1.8 million posts

Home
Pros
Forum
Start a new topic
About
Advertise
Contact Homeone
Articles
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024

Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2024