
I work in flooring - do you have a flooring question?
All I know is, we use a heat gun to soften the glue and lift the planks.
I guess once you get them up you could try a scraper.

I work in flooring - do you have a flooring question?
Check out my new 2mm vinyl plank from Karndean recently installed in my laundry!

I work in flooring - do you have a flooring question?
Good morning,
Oaks are the way to go if you are concerned about scratching of timber floors.
They hide the scratches much better than an Australian timber. Don't do a dark floor,…

I work in flooring - do you have a flooring question?
Good morning, yes, this one has been the question of installers for years.
We have only just last year made our installers do the vacuuming when they have finished. Many…

I work in flooring - do you have a flooring question?
Hi, sorry, I'm currently on 3 weeks holidays and about to pull my office apart for new flooring.
Preference Laminate 12mm is a good flooring. It really just depends what…

I work in flooring - do you have a flooring question?
I haven't had anyone tell me their Hybrid flooring is moving and making noises, its extremely ridged. Any flooring with a locking system needs to have a fairly level sub…

I work in flooring - do you have a flooring question?
I haven't had anyone tell me their Hybrid flooring is moving and making noises, its extremely ridged. Any flooring with a locking system needs to have a fairly level sub…

I work in flooring - do you have a flooring question?
Hi all, so while I'm here tonight does anyone have a flooring question?
I don't sell floor tiles but all other flooring.
Have you all seen the new Hybrids?

I work in flooring - do you have a flooring question?
Personly, I would go with option 1.
The thicker the tile the better I would think.
🤔
I sell everything except tiles, all other floorings.
But again if it were me…

I work in flooring - do you have a flooring question?
So guess you're sorted desaisnewBuild?

I work in flooring - do you have a flooring question?
Oaks are a bit softer than Australian timbers. I don't know the Hurtford range but 2mm is quite thin. I personally would have chosen a thicker wear layer.
Have a…

I work in flooring - do you have a flooring question?
I'm a bit of a fan of Preference....

Colour questions?
Hi,
I seriously wouldn't give too much thought to what's in date or not, tomorrow it will be out but in a few years it will be back again. Do what…

Colour questions?
Hi, yes Natural white should work.
Always do your timber trims hand rails anything you touch, in a full gloss.

Colour questions?
Hi,
I'd try Dulux Vivid White. Lexicon throws a blue.
See how you go, get a sample pot first.
Michelle

I work in flooring - do you have a flooring question?
I actually don't know these carpets. We may have them under a different name.
But with my experience the dearest ones hold more fibre, which means they are denser.…

Colour questions?
There is a Thunder storm over my place so I will be turning my computer off now.
See you all tomorrow night.

Colour questions?
we have tried colourbond colours against a single brick and think monument, gully, woodland grey and dune are the best matches. we are thinking monument for roof, gutters and fascia.…

Colour questions?
I'll be back in tomorrow night if I can so sorry, back to work and very busy.

I work in flooring - do you have a flooring question?
Hi Houselog,
That's a tricky question. Herringbone/Chevron is more expensive to install than other timbers due to the extra work involved. Also because I live on the south Coast we a…

I work in flooring - do you have a flooring question?
Hi Winnieshome,
I can well imagine how confused you must be, it is becoming very overwhelming with all the flooring out there.
Both floors are very resilient, hardwearing and most of…
About
Introduction
We are very special!!!
Hope you all have a great day!!!
Occupation
Colour and Building Consultant
Interests
Weight Lifting and Gardening