Driving over stormwater pipes in ground? - Need advice pls
Not stormwater.....
If it's compacted it will be fine. If you are worried, sink some pavers or timber into the ground to spread the load.
wall preping questions
How old is the plaster/house? Get rid of as much loose plaster as you can, no point patching unless what your patching to is solid. Sand area and edges with…
Another Demolition Question
If they are going to level the block, the tree root will probably get pulled anyway. No harm in asking, half a dozen beers also does a lot of talking.
*** Christmas Giveaway - Selby Acoustics ***
Hallam
On the drive to the west of the pool.
Maybe.
roof coating
Does the roof leak now? Are the tiles in relatively good condition? Are you doing it just for a clour change?
What height for dryer noggin
Don't worry about it. You'll need a piece of timber to mount the dryer bracket anyway, just screw that timber into the studs. Otherwise the top of the dryer will…
Is this a 'fixture' ??
Dryers generally just sit on the bracket on the wall. Whether they undo the bracket off the wall is another story.
Analogue or Digital Antenna/Aerial? Costs for fitting?
The signal being sent is digital...1's and 0's. And you either receive it or you don't and digital can be recieved at lower signal level than analog can ....that's why…
Analogue or Digital Antenna/Aerial? Costs for fitting?
Bull droppings. No difference between an analog antenna and a digital ready one. It's marketing hoo haa.
Does the antenna point towards the transmission towers? Are all the connections…
Is it time to get a lawyer? YES!
I'm trying to be constructive. Why wouldn't you send everything registered so they have no excuses like never receiving emails etc.
Is it time to get a lawyer? YES!
Why would you not have sent a registered letter of your intentions in the very first place and avoided the delays? All of your corresponddence should have been this way.…
Another noggin question
Studs are vertical, noggins are horizontal and about chest height. Sure you want your pictures this low?