rodels posted:Roof support, want to remove some walls
According to the council building approvals are required for the following.
…
rodels posted:Roof support, want to remove some walls
The thing is I went the route of ringing the council to find out what I needed. I have done additions to the external of a house and for additions…
rodels posted:Roof support, want to remove some walls
Rang the council today and no permit required for internal works.
rodels posted:Roof support, want to remove some walls
Now I am thinking along the lines of this configuration. The red line is the section where the wall I am wanting to remove, The yellow are two new struts…
rodels posted:Roof support, want to remove some walls
OK so my information I put up in the photo was actually incorrect. I got up there this morning with better light and a good camera and flash and you…
rodels posted:Roof support, want to remove some walls
I'm not sure where to extend it to. The photo above shows the room and robe walls in black outline,the joists are green and the red dot shows the position…
rodels posted:Roof support, want to remove some walls
The span tables are from AS 1684.2 table 27. Also if you look at for example Hyspans table a 170x63 will support 6m2 of tiled roof and span up to…
rodels posted:Roof support, want to remove some walls
I took some photos but the area was too dark and photos are way to under exposed to see anything. I will get a DSL and flash up there ASAP.…
rodels posted:Roof support, want to remove some walls
I have a brick house with 3 bedrooms and in the bedrooms are recessed robes which vary in widths 1.2m, 1.5m and 1.8m. The doors on the robes are 820mm…
