If they are screwed on just buy a security bit set from bunnings.

Any decent Air conditioning contractor should be able to sort it out. Are you getting Ducted A/C? Ask them for a quote.

Another way is to lift the door by adjusting the rollers. Screw in to lift, screw out to drop.

Loretta you didn't have to get us anything! I already feel bad enough I haven't been able to get back to finish off! I WILL be back soon,…

For aluminium doors you will be looking at between $12-1400 a panel. 6m span would be about 8 panels

For a table top? Would you prefer 10mm thick or 6mm thick?

You never specified the year

Your telling me!
Looks good, you win for sure!

The galvanised mesh has to be used in conjunction with a diamond grille, it doesnt have the same strength as the stainless mesh, so the door will twist and collapse…

If only you were in Sydney! Those prices are more than double what I would charge.

So I finally got off my backside this afternoon, with our package not too far away, time is running out!
Before:
After:
Got the materials to do the other 2 bedrooms, still need…

There is an adjustable stop on the track. By law there must be a minimum gap from the glass to the wall as the door shuts.

Forget the kanga, get a small bobcat, much easier (as in quicker!)

I have some unused, leftover blocks from my retaining that I need to sell.
I have:
13x Standard Tasman Blocks
3x Corner blocks ( I think 1 left, 2 right, will have to…

They have only done a base coat, to set the paper tape. There should be another 2 coats ontop of that!

Ben from BorderScapes. 0412733278

I even managed to paint the rest of the back fence, bake a cake AND cook roast lamb for dinner! But when I stop, I crash, I'll probably be…

I washed the car this afternoon? Does that count?
Next? Go to the snow again, doing a day trip on Saturday, then down to Floriade for Fee's birthday on…

I ordered 7.5, that worked out to be about .2 extra. But! Because the bobcat driver was lazy and didn't level it out properly, I ended up needing an…

Got home late tonight, steel got delivered today. Managed to get out and put most of it in, still needs to be tied and the bar chairs put under,…

Saw you drive past on the weekend! Whats been happening with your house?

Thanks, I love the size of it too, just have to see how my back handles it on Saturday, 7.3 cubic meters! Will be interesting!

hi lorretta I can organise a bobcat to do your clean if you want, it would probably cost about 250. They could put it straight in the truck then dump…

Was just looking back through some older photos. Man that was a lot of blocks! Things sure have changed in the last few months!

In other words, ski season is over!

So the track system is CDS? If it is, thats a very cheap price.

We decided to put the timber retaining wall there as there is an easement in the bottom corner of the block, it's 1500x1500, and we aren't allowed to change the…

I said the other night I was going to put mirror in them instead of colour back. I don't think it went down too well! I can get…

There was a poly membrane put under the plywood base. Boards were secret nailed, and glued using bostik ultraset. 85mm boards, I can't remember the species.

Thanks for your comments BZMZ, you're going to have HEAPS of fun building your retaining walls
It was a fairly stressful week last week for…