zqs posted:Daniela Appliances
Hello,
Has anyone had any experience using Daniela Appliances?
https://www.danielaappliances.com.au/
They seem to have good reviews on Google.
I met Daniela in her showroom in Sydney and she took me…
zqs posted:Daniela Appliances - Anyone heard of them?
@vengenace - did you go ahead with Daniela Appliances and if you did, how are the products functioning?
I am considering all daniela appliances for my new build in Sydney
zqs posted:Square set or Shadowline cornice
Hello,
I am building a double storey house with 3.0m ceiling height to the ground and 2.7m to level 1.
In relation to the cornice, not sure what will look the best…
zqs posted:Facade color scheme advice required
Hello,
Please help me chose the exterior color (Dulux) for my facade.
Any feedback and advice is appreciated.
Thank you.
zqs posted:Help with Colour selection for facade
did you end up deciding the facade color scheme?
zqs posted:Ideal Entrance Door width for 1.9m wide opening
Just as fyi;
Ceiling height is 3.0m for the ground floor.
zqs posted:Ideal Entrance Door width for 1.9m wide opening
Just an update;
I did change the plan a little and finally decided to go for:
1.4m wide and 2.7m high entrance door (pivot)
One side light of 400mm
zqs posted:Garage Storage cost estimate (built-in robe 4m wide)
Hello All,
I am considering an option either to:
1. Add a 4m 'built-in robe' along the wall of the garage or
2. Add a 2sqm of internal storage space
What could be the…
zqs posted:Looking for feedback and color combination for the Facade
A couple of additional 3d images
zqs posted:Looking for feedback and color combination for the Facade
Hello All,
Would anyone be kind enough to provide feedback on the facade. The construction will start in about 4 weeks.
My intention with this post is to seek feedback and suggestion…
zqs posted:Building element extending more than 1m above gutter line
Hello,
I am going to go through CDC for approval and have been asked to decrease the building height from 8m to 7m as the building height according to Cl.3C.16.6 cannot…
zqs posted:Ideal Entrance Door width for 1.9m wide opening
Hello All,
I have a 1.9m opening for the front entrance door and would like to know what would be the best and ideal door width if I need to have…
zqs posted:Garage door
I have requested builders to provide a quote for "aluco bond sectional double garage door". They have given me a range between $5k and $6k.
Has anyone installed any of the…
zqs posted:Chosing the Brand (Kitchen Appliances) - New Build
I see, thank you for your input Davos.
zqs posted:Hebel vs Brick Veneer (external walls - new custom double s
I am not sure if every builder would ensure proper coats are done.
Will have to check with the builders.
zqs posted:Chosing the Brand (Kitchen Appliances) - New Build
Every builder provides a different brand of Kitchen appliances.
I have checked with almost every project builder and some custom home builders as well.
By these appliances I mean - Cooker…
zqs posted:Hebel vs Brick Veneer (external walls - new custom double s
Can some pro-active planning in relation to studs help in attaching items to the Hebel external wall?
Also, as Gaudi pointed out about 'seal coat' and 'top coat' - does the…
zqs posted:Hebel vs Brick Veneer (external walls - new custom double s
Appreciate your candid response Gaudi.
zqs posted:Hebel vs Brick Veneer (external walls - new custom double s
Thank you Ashington Homes for providing a detailed feedback.
Your experience and comments really helps in my decision process.
Thank you once again.
zqs posted:Exterior Building
Thank you for getting back MegKo.
Do you mind sharing the photos if possible?
I am still a bit skeptic but having you going ahead recently gives me a little confidence
zqs posted:Hebel vs Brick Veneer (external walls - new custom double s
Hello All,
I am planning to build a double storey custom house (37 squares on a 450sqm block) in Sydney.
And what I have found is alot of custom home builders and…
