Sorry that was a typo. It’s almost a year and a half since installation. The problems started within a year of it being installed. Just having issues with the landscapers…

Hi,
I'm after a loft ladder which can be square set to fit flush with the gyprock. All the ones I've seen so far show an architrave being used.
I'm sure…

The joists have split as the screws are off center. Some of the joists have the screws 10mm from the edge of the joist. If it was just on the…

MClark Thanks for the response.
Please see examples.
I’ve got the rubber joist protector on my other deck which has been down a…

Hi
Our decking which was installed about 6 months ago has issues with the joists splitting. This has caused some screws to pop up as the screws won't stay down.…

It’s different to Boral’s hard plaster, that can only be applied to solid masonry/concrete surfaces. The multi finish can be applied to Gyprock.
Looks like there are now several companies…

Glad it worked out well for you. Out of curiosity how did you go about finding the product and someone to apply it?

Everything’s as good as new. No issues with anything, I’d 100% do it again without any worries. Buying good quality appliances is the key as they likely have a much…

Looks great. Did you use any sealer?

After taking another look. I like your idea of not filling the joins. Means I can do it in sections and once finished I can just silicone them.

It mostly level, has some aggregate showing in a few places. And a few small areas I can patch. The main purpose is to have a cleaner looking floor which…

Hi, just checked my calculations and realised I made a big mistake with the volume needed! Yes it’s much cheaper to hire the grinder at $1500 a day.
I was planning…

Hi,
I've been researching how to go about sealing and epoxy coating my garage floor and seem to be going around in circles on how exactly to do it and finding…

Hi,
I was wondering if any of you in NSW have had a new lowered kerb and what it cost?
Ours is breaking up and needs replacing, the actual cross over from…

Hi,
We had a fantastic experience with importing our goods. The total cost of everything including taxes, custom duties, custom broker, insurance, shipping etc was almost exactly half the price.
Some of…

Hi Steve, had a fantastic experience with the whole process and would highly recommend it if you're able to wait 4-6 weeks. Will message you directly.

Hi Stewie, thanks for the reply.
I discovered the FEG system on the Lincoln Sentry website, but they couldn't be any more unhelpful. They won't give out any details of anyone…

Hmm completely forgot about the water pressure difference. I really don't want to have taps blasting out water and soaking the kitchen, perhaps it's not worth the cost saving here.

Hi
Do you have or have seen the FEG wardrobe system?
We really like the look of it but have some concerns about having shelves with only rear support.
We're also looking…

Thanks for the replies, now anyone know anything about taps?

Thanks for the links, I've read half of that now, I didn't realise so many other people have already done it…

Hi,
We're currently speaking with a company in Germany to import our Gaggenau appliances. The appliances are approximately 45% of the cost here. I've been trying to look at duty fees…

Hi Bels,
Yep the newer firmware is supposed to have virtual host settings, mine was running 3.0.8 and didn't have it, so upgraded to the latest version 3.0.10 and it doesn't…

It'll be saved to the NVR which can record at full frame rate, but I want to have it stored off site too. Not so worried about the quality here,…

To be honest I'm not really sure what I'm doing, still can't get it working correctly
I thought it'd be easier to connect to the cams…

Hi Bels.
A few things have changed since my last post
I haven't opened the Y Cam and will be returning it. I've purchased a Hikvision NVR…

This is different to a level 5 finish. This is done with one application and is a polished finish no need to sand.
@Tim - did you find out of your…

Hi Tim, unfortunately too late, however it would be good to have your mate's number for later as he may come in handy. I'm getting tired of this white setting...

Hi,
I've just purchased an IP Camera, specifically a Y Cam Gen 2 1080 HD bullet. When I ordered it I thought it worked with Y Cam's Homemonitor system, which I…

I spoke with Gyprock and they too could only talk about a level 5 finish. For this you need perfectly flat walls before spraying the top coat on, which then…

It's so common back in the UK, that he says it's quicker for him to skim the whole ceiling than to just do the joins.