Hi all, the answer to the problem....all the problems including the fan speeding up was solved when the unit failed completely Jan 2014, middle of the hottest day on record........the…

Hi, OK I can live with the temp indicator readout differences, but the evap cooler problem where the fan speeds up when you turn it down and down when you…

Hi, as the weather is warming up I'll be cranking my Brivis evap cooler up.
Some months ago we had the recall mod done as Brivis advised, and now I have…

Hi, the Vulcan Powerhouse heater we used to have failed about 2007, and had to be replaced, and the recomended one was the Brivis Buffalo, installed by Chalcot Plumbing of…

Hi, 10 to 15 deg?????...that is faulty......my thermo on the Brivis Buffalo reads 1 degree lower than an independent thermometer on the wall, so we have to set the thermostat…

Hi all, I have a Brivis system too, 5 outlets, installed about 2005, and I can say that it will give a temp diff of about 10 deg normally.
As advised…

Hi Dubman, my first post here as I just found the site when browsing for evap cooling problems.........condensation will only occur when water vapour meets a cold surface.
I think the…