In the end, two pieces of treated timber (20mm thick) were bolted onto the joists and planed when there was too much sticking out. Passed inspection.

Perfect. Thank you.

Once again - I can confirm the correct timber is used. The designer specified it, the permit was granted, I bought it and the carpenter confirmed it. It meets standards.
Other…

Also just to confirm
Yes surveyor marked out/approved the subfloor/holes
None of the timber is untreated
I'm unsure of connections, but again subfloor was passed.
The only issue identified was the frame overhang

Appreciate the feedback
Can confirm all the correct timber was used. I didn't put it together, but I did buy the materials, all specified in the design/engineering.
Laminating an LVL in this…

Thanks. Sounds like a plan

The frame is square, the joists are a little out.

Thank you, I did exactly this. I kept some tiles tho

Hello,
The building surveyor has rightly picked up on a frame overhang issue with a small extension. I'm just wondering what the easiest solution to this is...
Can I just add 20mm…

Thank you - much appreciated.

Hello,
I am currently building a small reno (owner builder), which required supply and install of concrete roof tiles.
The tiler had a pallet of tiles delivered here, with at least 50…