the rubber underlays will out last the foam underlay,
the ripple design in the rubber under lay helps with the softness under foot,
foam will compact over time and in doing this…

try pro grind , if they cant do it ,they'll be able to help find you someone
http://www.progrind.com.au/fcremoval.htm

as far as I know I have never heard of asbestos being in cork tiles,
since cork is a natural product made from the bark of the trees ,
in saying that…

if there is not any movement in them you can top them with an outdoor leveling compound , Ardex has the best products for this,
if there is any movement you…

If you go with a subduide finish in your polyurethane ,i.e, satin down to a matt finish,you will have a floor that will appear to look better for longer than…

both products are applied like a general cleaner,
the stripper is to help remove marks and any suface glue that may have been left behind during the laying process, ( I…

Myself personally strip and seal on completion of laying,
kardean supply both of these,
This way you remove any excess glue and marks , and have a good finish on your floor,
If…

thanks for the welcome,

hey there,
Kardeans strip flooring is one of the top sellers in NZ,
I personally prefer this product to polished floors,
It is very close looking to timber but the maintance is…

hi there, there are 2 ways of acheiving a polished look on conrete ,either thru grinding to a polished finished or thru grinding then either coating with a polyurethane or…

here is a little bit about me,
I've being involed in the NZ flooring industry for nearly 15 years,and have indepth knowledge in the following areas
14years floorsanding and polyureathane experience with…

I have a huge prob with the idea of having solvent vapour being released in your home from the 2pack product, even after it is dry ,it will still release…

One other factor to consider in doing a room at a time is the way the floor boards are running and the length of time between the other rooms being…