Stay away from kempas it is cheap and nasty.

From what i have seen of heble it is very uneven you may have trouble with levels. With the glue you should be able to scrape it of easy dont…

I am not a pro but what i do is cut in then roll quickly then brush over what you have rolled so you see the brush marks. I add…

Stormy the problem is if you do have a problem the manufacturer does not warrant the timber as it has not been installed to there specs so if the layer…

If they are not doing anything about it go to the hardware and buy some caulk in colours get one that matches your floor it is a flexible filler and…

The glue could be the problem not letting the boards close up if the tounge and groove is a bit tight have you measured the boards to see if they…

What nails can you see near the wall ?
Floating floors do not get nailed so there should be no nails.
What are they going to nail the boards down to is…

bunnings has the wall ends you will need.

I think your posts are coming across with quite an agressive undertone, which I dont think is doing you or anyone else any favours. Please be wary of the way…

The quotes include everything you have specified - however I'm not sure about the water proofing ( ??). Sound proof underlay will be extra on the first floor. I forgot…

Yes around that split between 3 of us not so good and that's 6 to 7 days a week and we don't do 9 to 5. What did you earn…

$7000 a week turnover I had just under $200000 in expenses last year not including wages doesn't sound so good now does it.not to mention 5years of doing this ****…

I think I seen it on boral or sydney floorings web site either way I'm not going to argue about it. Every job is different sometimes I'll do it other…

Im pretty sure i have seen that the department of forestry is now saying it is not required.
My question is if your customers run there air conditioners all day…

Its not a good price and the 7mm tarkett is not a good laminate go somewhere else.

The guys not doing you any favours with that price.

Just install a fillet mould beading around perimeter only stands up about 5mm or use cork strips then stain and coat with the timber.

Hope you are happy with the end result which ever floor you get.

Nothing i have ever laid and i do this every day has ever compared to quickstep.

Its quickstep there is no glue and yes every now and then you get a box with chips on the end we cut them of and use them as starters…

Lex timber isnt for everyone i think you should get tiles by the time you find the installer your happy with you will be ready to move house.

Yes lay the floor up to the skirtings leaving the required expansion gaps then nail your beading to the skirtings.You should use scotia which looks better than quad.

Any big name flooring company not the cheapest backyarder you can find.Dont worry about nail lengths etc each layer will have there own ways of doing things you have to…

Lex dont stress just pick a timber from a reputable company let them do there job and if it goes wrong they will fix it.

I have been told direct from there sales rep to stop complaining about there product and just lay it i have returned a few batches of there laminate mainly because…

A 25mm nail will go around 10 to 12 mm into the ply with a 14mm timber floor.

Quickstep is the only one the other 2 are crap compared to quickstep whick is why they are also cheaper.Quad is used around the walls to cover the expansion gap…

You nead to be a installer then you will see for yourself.If you have a 12mm thick flooring and you staple or nail it the nail is holding on to…

The flooring installer can undercut the kitchen panels inside dishwasher and the fridge and get the kitcen installer to put kickboards on after the floor is installed.

For the dishwasher and fridge panels just ask the installer to undercut them for you.
If the skirtings are 12mm then cutting gyprock 20mm high is a good idea to allow…