ownerinproblem posted:Waterproofing around door jam?
Screeding is done before waterproofing
Which part did you find not upto the code?
ownerinproblem posted:Waterproofing around door jam?
Is it filled with an ANGLE or what?
The tiler informed me that gap is going to be filled with glue and tiles and the angle as well
ownerinproblem posted:Waterproofing around door jam?
Is this waterproofing done correctly?
The tiler plans to install aluminium angle just before starting tiling and right now my concern is if this is done correctly or not?
These are the…
ownerinproblem posted:Staged payment request BUT work not done as per contract
1) I had requested R6 ceiling insualtion batts, however I noticed that on some areas there are huge gaps which will allow hot air to sweep in, and also noticed…
ownerinproblem posted:Floor Plan Questions
You can upload the image directly here, that url you sent is full of spam ADs
ownerinproblem posted:Acrylic garage doors? Anyone?
Thanks, that was helpful information!
ownerinproblem posted:Building Inspector recommendation in South Australia?
Adam Baines
Grad Cert Bldg Surv / Grad Dip Bldg Surv / MSAAPA
Accredited Building Professional APB20210035
Builders Lic 183023
Pest Control Lic 84868
Ph 0412202336
PO Box 1083 Campbelltown SA 5074
Email:
ownerinproblem posted:Acrylic garage doors? Anyone?
I saw this cool garage door but it’s in acrylic and doesn’t support putting thermal insulation on it.
Wanted to know pros and cons of it , if anyone…
ownerinproblem posted:Long hallway lighting suggestions
Where were you all these months! I will check this one with the Gyprocker.
While I have you here, let me ask you a quick question....
Do you have actual pictures of…
ownerinproblem posted:Long hallway lighting suggestions
Mine IS close to 12m, its around 11.95m including the 5 90mm studs
I do not see the control joint you mentioned in this report
ownerinproblem posted:Need urgent help regarding facade colour combination please
May be this would help?
https://www.google.com/search?q=facade+ ... e&ie=UTF-8
ownerinproblem posted:Insulation question new build
Could of questions about insulation:
1 ) I have R6 ceiling insulation batts all over, and R2.5 to the external walls EXCEPT my garage external walls
They are…
ownerinproblem posted:Long hallway lighting suggestions
Only Skylight I would install is one with electricity, do not want to cut holes in the roof... (
ownerinproblem posted:Data Points
You connect the switch to the modem via RJ45 cable, and then attach whatever devices you want to the switch.
As for getting interconnectivity, you need to configure that on the…
ownerinproblem posted:Long hallway lighting suggestions
I have a really long hallway which is 1100mm W x 11500mm L
I would appreciate if anyone can give suggestions to light it up with Linear LED lights that goes…
ownerinproblem posted:Hall Way Lighting Suggestion
I have a really long hallway which is 1100mm W x 11500mm L
I would appreciate if anyone can give suggestions to light it up with Linear LED lights that goes…
ownerinproblem posted:Back-flow Prevention Valve ?
You have been of great help mate!
I will find out what to look out for
ownerinproblem posted:Back-flow Prevention Valve ?
Sorry to bother you, could you please suggest any non electric bidet which meets this requirement of 25mm gap?
I looked at this one
https://www.bunnings.com.au/evekare-wat ...…
ownerinproblem posted:Back-flow Prevention Valve ?
That was knowledgeable information
The plumber said , it’s not easy to do the back overflow valve now that the walls are done!
ownerinproblem posted:Back-flow Prevention Valve ?
Bunnings informed this would do the job
https://www.bunnings.com.au/kinetic-chr ... r_p4920512
ownerinproblem posted:Back-flow Prevention Valve ?
My walls are in and roof is done
I want to install Bidet seat, and its a requirement to install a Back-flow Prevention Valve
Can this be installed now, how difficult is…
ownerinproblem posted:Cracks in slab!
No water around the slab edges, the gutters were fixed , yes
But I noticed these cracks after those heavy rains, and the gutters were only fixed AFTER the rain
ownerinproblem posted:Cracks in slab!
I checked slab edge, no honeycombing , no cracks on the slab edges
The gutters were broken and the water was falling off from it on the sides…
ownerinproblem posted:Foil wrap not done before brickwork
I am in the same situation, would you be able to give some insights in to this?
I am in SA
ownerinproblem posted:Cracks in slab!
Slab was poured in June, and cracks have started to appear from last 1 month, some have remained the same, some keep extending week by week.
The most recent ones happened…
